Black BLK-IPD102 Manual de usuario descargar pdf

www.digiop.com

BLK-IPD102_CQ

5/27/11

Step 2. Connect the camera to the LAN

1. Attach a LAN drop cable to your camera. If the LAN cable will be used to power your camera, DO

NOT apply power to the camera at this time.

2. Connect the DC12V adapter to the power jack on the drop cable. DO NOT apply power to the

camera at this time.

LAN

DC12V adapter

DC12V, Audio in,

Audio out connectors

Step 3. Install IPAdmin Tool

The IPAdminTool is a utility for conguring the network settings of your Digiop Black cameras and installing

new rmware. It can be loaded on a Microsoft Windows XP, Vista or Windows 7 operating system. At a

computer on the same LAN (subnet) where your cameras will be installed, do the following:

1. Insert the CD mini disk provided with your camera into your computer’s CD ROM drive and open the

CD in a Windows Explorer window.

2. Find the IPAdminTool directory on the CD.

3. Copy the IPAdminTool directory with its contents to your computer hard drive.

Step 4. Configure the network settings of you camera

When your IP camera is attached to a network and initially powered on, it attempts acquire compatible

network settings from a DHCP server. If it cannot nd a DHCP server, it congures itself with the following

static (xed) settings, which may or may not be compatible with other devices on the network.

IP address: 192.168.0.100

Subnet mask: 255.255.255.0

Gateway: 192.168.0.1

Your camera must be congured with static network settings that are compatible with the LAN. If your

LAN has a DHCP server, use the following sub-step. Otherwise, use the sub-step procedure below for LANs

without DHCP.

Installing cameras on LANs with DHCP

1. Connect your camera to the LAN, then power on the camera.

2. Open the IPAdminTool directory on your computer, then double click the le IPAdminTool.exe to

start the application. When the IPAdmin Tool starts, it will discover all the IP devices it supports that

exist on the network. The discovery process may take a few minutes.

Review the list of IP devices found by IPAdmin Tool. You can identify your camera by the MAC

address. If the camera was not found, click the Refresh button every minute until your camera

appears in the list.

3. After nding your camera, right click the entry, then select IP Address from the drop-down list. An

IP Setup window will open.

Indoor/Outdoor Mini-Dome

IP Camera Quick Installation

Guide

This document guides you through the basic steps to install and congure your Digiop® Black BLK-IPD102

IP camera. For detailed instructions, refer to the User Manual.

Find the camera’s MAC address on the product label and enter it here: __________________

Step 1. Install the camera

Separate the camera base from

the dome assembly by removing

the three screws.

Using the base as a template,

mark and drill the location of the

holes for the mounting screws.

If the camera drop cable will be

routed through the mounting

surface, drill a 1-3/8” hole for

the cable

Anchor the camera to the

mounting surface with three

screws.

Mounting

screw

holes

Hole for

drop

cable

Dome

Wall

inserts

1.1 Connections

Connections to the camera for

audio in and out (microphone and

speaker), D/I sensor, alarm, video out

BNC, and RS-485 control are made

through the 11-pin terminal block.

Terminal block pin assignments

The 11-pin terminal block may be detached from the camera. Install the block in the location shown above.

Refer to the User Manual for more information about interface connections and specications.

1 2 3 4

Indice de contenidos

Pagina 1 - IP Camera Quick Installation

1www.digiop.comBLK-IPD102_CQ 5/27/11Step 2. Connect the camera to the LAN1. Attach a LAN drop cable to your camera. If the LAN cable will be used to

Pagina 2 - Static Option

2www.digiop.comStatic Option4. In the IP Setup window, click the Static option bullet. If you have other compatible network settings you want to appl

Pagina 3

Pagina 4 - Horizon alignment

Comentarios a estos manuales

Sin comentarios

Black BLK-IPD102 Manual de usuario

Busca en linea o descarga Manual de usuario para Cámaras De Seguridad Black BLK-IPD102. BLK-IPD102 - Indoor/Outdoor IP Dome Camera Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Black BLK-IPD102