Black BLK-CPT235VH2 Manual de usuario descargar pdf (Pagina 9)

5High Performance IR CCTV Bullet Camera User Manual

SECTION 2: INSTALLATION

3. Drill a 3/4” hole for the drop cable, if necessary.

4. Anchor the base to the mounting surface using the screws provided, or screws better suited for the surface structure.

5. Route the drop cable through the hole through the base plate, or through the cable guide in the mounting bracket, then

attach the camera to the base using the four (4) machine screws provided.

6. Connect the camera drop cable to video and power cables as required.

NOTE

Drop cable connectors are not waterproof.

2.3 Camera adjustments

In this procedure, set the camera to point at your surveillance target. Rotate the far - near and tele - wide rings to frame the video

image.

1. Apply power to the camera.

2. If using a hand-held CCTV video setup monitor with your camera:

a. Remove the cover to the OSD control panel by unscrewing it counter clockwise.

BLK-CPT235VH2 OSD Controls BLK-CPT237VH2, BLK-CZT242VH2,

BLK-CZT243VH OSD Controls

b. Connect the BNC adapter cable to the VIDEO TEST port on the OSD control panel.

c. Connect a CCTV setup monitor to the BNC adapter cable.

3. If using a CCTV video system monitor to setup your camera, connect the video output of the camera to your CCTV monitor.

4. Verify that video from the camera can be seen on the monitor.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Sin comentarios

Black BLK-CPT235VH2 Manual de usuario Pagina 9