Black BLK-IPD105M Especificaciones descargar pdf (Pagina 48)

www.digiop.com

SECTION 3: SETUP CONFIGURATION

3. Click on the network you want to access. Device information such as ESSID, mode, MAC address, channel, and encryption will

appear on the right side of the list window.

4. Click Copy to user Setting to copy the device information to the “Networks to connect” frame.

NOTE

If a ‘Not Connect Wireless….’ message is displayed after clicking the ‘Refresh Network List’, check the setting of your wireless

router. Also make sure the USB wireless LAN adapter is installed correctly.

Connecting to a wireless network

After choosing a wireless network, the ‘Network name, Mode, Authentication, and Encryption’ are displayed on the screen.

Supported devices:

— Belkin Wireless-G USB Network Adapter (PN: F5D7050)

1. Enter the ‘Network key’ in the eld provided. The network key should equal the AP or client PC you will communicate with.

2. Set the Timeout, Retry count, and Disable auto start functions using the information below.

Timeout: When an answer is not received from the server within a set period, a timeout occurs. Set the timeout duration to

one of the options in the dropdown list. A reconnection to the server is required.

Retry count: The number of re-connections attempts when a timeout occurs.

Disable auto start: Click this checkbox when you do not want to automatically start wireless networking.

NOTE

The current time out or retry count is not renewed automatically. Try to renew the page manually to see if the network is

connected properly.

3. Set the wireless network IP conguration. If your mode is Ad-Hoc, only a static IP setting is allowed.

Obtain IP address via DHCP: Obtain the IP address from DHCP (dynamic IP).

Use the following IP address: Set the IP address manually (static IP). The IP address must be unique on the network.

4. Click Apply to save and use the current settings, or click Reset to return to the previous settings.

5. Disconnect the Ethernet cable from the device. Unplugging the Ethernet cable causes the device to use the wireless network.

6. Wait about 40 seconds for the device to switch to wireless mode.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 97 98

Sin comentarios

Black BLK-IPD105M Especificaciones Pagina 48