Black BLK-IPD105M Especificaciones descargar pdf (Pagina 70)

www.digiop.com

SECTION 3: SETUP CONFIGURATION

RS485-AUX: Used when you attach any auxiliary device which requires serial communication to an encoder. This feature is

supported in the UART1 port only.

RS232-PTZ: Used when you attach a PTZ camera to an encoder and you are using RS-232 communication protocol.

RS232-AUX: Used when you attach any auxiliary device to the encoder and you are using RS-232 communication protocol.

RS485/RS2322 - SerialOverIP: To read/write serial data from an attached serial device over the network, select the

SerialOverIP option.

Serial over IP network

External

When a 3rd party program is added to the server of the device and the program needs to control the attached serial devices,

select the external option. If you do not use any serial control program, ignore this option.

RS485-AUX: When an add-on program for RS485 communication with an auxiliary device is required. This feature is

supported by the UART1 port only.

RS232-AUX: When an add-on program for RS232 communication is required.

SerialOverIP

When the SerialOverIP type internal option is selected, enter the IP address and User Datagram Protocol (UDP) port number. The

default UDP port number is 7002.

PTZ Protocol

PTZ Name: Set the UART type as RS485-PTZ before selecting the PTZ protocol. Open the dropdown box and choose the

best protocol to communicate with your camera manufacturer.

PTZ Address: Enter the PTZ address you set in your PTZ camera. Refer to your camera hardware manual for setting the PTZ

address.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 97 98

Sin comentarios

Black BLK-IPD105M Especificaciones Pagina 70