Black BLK-IPD105M Especificaciones descargar pdf (Pagina 61)

55IP Camera and Encoder Software Manual

SECTION 3: SETUP CONFIGURATION

Option: Turn on the LED of vsignal. Select When video signal loss is detected.

Basic conguration

Digiop Black devices have dierent positions for their LEDs. Refer to the applicable user manual for more information.

1. Select Enable LED.

2. Select LED1 and/or LED2.

3. Select the Event Publisher from the dropdown list to associate with the LED.

4. Select the Operation of each LED, Blink or On.

5. Select the Time Out (duration of reporting). The LED can be lit from 1 ~ 5 seconds, or on permanently.

6. If you are conguring an LED to report DSP load (dspload), temperature, and video signal loss (vsignal), and/or heartbeat,

additional conguration options are available:

— Set the dspload limits to: When setting the DSP limit and the Publisher selected is dspload, the associated LED

will operate as congured in the Location section when the DSP load exceeds the limit.

— Set the temperature limits to: When setting the temperature limit(s) and the Publisher selected is temperature,

the associated LED will operate as congured in the Location section when the temperature is outside the limit(s).

— Turn on the LED of vsignal: Select either “When video signal loss is detected” or “When video signal is normal”. If

a Publisher selected is vsignal, the associated LED will operate as congured in the Location section when the option

is satised.

— Turn on the LED of Heartbeat: Select either “When heartbeat status is watchdog” or “When heartbeat status

is normal”. If a Publisher selected is heartbeat, the associated LED will operate as congured in the Location section

when the option is satised.

3.5.13 DDNS

To congure the Dynamic DNS (DDNS) settings for the device, go to SETUP > System Options > DDNS

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 97 98

Sin comentarios

Black BLK-IPD105M Especificaciones Pagina 61