Black BLK-CPV700R Manual de usuario descargar pdf (Pagina 10)

SECTION 2: INSTALLATION

Screw locations for

surface mount

Hole in

side for

drop cable

(conduit)

Hole in

base for

drop cable

(conduit)

Screw locations

for bracket mount

Cable channel

(between base and seal)

BLK-CPV700 series camera base

5. Drill holes for the screws that anchor the base to the mounting surface. The four (4) course-threaded screws and wall inserts

provided are sucient for mounting the camera to most surfaces. However, other fasteners may be more appropriate.

6. Drill a 3/4” hole through the mounting surface for the drop cable, if necessary.

7. Route the camera drop cable through the base as planned.

8. If you are installing a BLK-CPV700 series camera, position the base seal appropriately onto the base.

9. Anchor the base to the mounting surface using appropriate fasteners.

10. Reattach the camera module to the base. Do not install the dome cover at this time.

11. Connect the camera drop cable video and power leads to a video and power extension cable as needed. If using 12 Vdc to

power your camera, observe the polarity marked on the power drop cable when connecting the power extension cable.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 34 35

Sin comentarios

Black BLK-CPV700R Manual de usuario Pagina 10