Black BLK-CPV700R Manual de usuario descargar pdf (Pagina 27)

23High Performance 700TVL CCTV Dome Camera User Manual

SECTION 3: SOFTWARE SETUP

— ON: When motion is detected, the motion detection areas where motion is detected are highlighted.

RETURN: Select RETURN to return to the SPECIAL menu.

PRIVACY: The PRIVACY feature allows you to block up to 8 areas of the image from being seen. The areas blocked are covered by a

color-coded polygonal (3-, 4-, or 5-sided) shape. Set PRIVACY to ON then press the joystick in to open the PRIVACY sub-menu.

AREA: Set the cursor on AREA, then rock the joystick right or left to select any area 1 .. 8. These 8 areas can be individually

enabled or disabled, positioned anywhere over image, are color coded, and can be reshaped. To setup a privacy for the area

selected:

— Set the cursor on AREA DISPLAY and rock the cursor to ON to use the area, or OFF to disable it. If set to ON, press the

joystick in to re-shape and position the privacy area:

— To reshape the privacy area, rock the joystick up, down, left or right to reposition the corner of the shape you

want to move. Press the joystick in to move to another corner of the image, then advance to the POSITION

display. You can reposition the top left, top right, bottom left, and bottom right corners of the shape.

— In the POSITION display, rock the joystick up, down, left or right to move the shape to the area you want to block,

then press the joystick in to select it.

— If using the area, move the cursor to COLOR, and rock the joystick left or right to select one of 15 colors for the

rectangle.

— Repeat this procedure for each of the 8 areas.

RETURN: Select RETURN to return to the SPECIAL menu.

DEFECT: This feature is used to eliminate up to 512 white spots (defects) in the image. Selecting DEFECT opens the DEFECT

submenu.

SENSE-UP: Use this option to set the sensitivity for nding defects. The higher the value of “SENS UP”, the more defects will

be compensated. Setting this level to x64 or x32 produces the best results.

DIFF: Use this option to set the defect size from 1 to 3. The higher the DIFF value, the brighter the defects it will detect.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Sin comentarios

Black BLK-CPV700R Manual de usuario Pagina 27