Black BLK-PTZ12X Guía de instalación descargar pdf (Pagina 29)

Installation Guide

1) Make a cable entry hole on the wall to recess the cables. Otherwise, users

could push up the Cable Entry Board on the Compact Pendent Mount’s

Mounting Plate to place the cables, as shown in the photo below.

2) Fix the Compact Pendent Mount on the wall with proper screws and screw

anchors.

3) Attach the Waterproof Rubber to the Compact Pendent Mount.

4) Run the cable(s) through the Compact Pendent Mount with the Data Cable’s

22-pin cable coming out of the outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. The sponge can be

placed in two ways as shown in the illustrations below.

5) Thread the cable(s) through the Outdoor Mount Kit and join the Outdoor

Mount Kit to the Compact Pendent Mount with the supplied screws and

washers. Then adjust the Waterproof Rubber to the joint.

6) Connect the cable(s) to the Dome Camera.

7) Join the Dome Camera to the Outdoor Mount Kit with the supplied M5 screw

and washers.

Cable Entry Board

Mounting Plate

Sponge

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 164 165

Sin comentarios

Black BLK-PTZ12X Guía de instalación Pagina 29