Black BLK-PTZ12X Guía de instalación descargar pdf (Pagina 96)

User Manual

 Detection level [1-100]

The default level is 10. The item is to set detection level for each

sampling pixel; the smaller the value, the more sensitive it is.

 Sensitivity level [1-100]

The default level is 80, which means if 20% or more sampling pixels

are detected differently, system will detect motion. The bigger the value,

the more sensitive it is. Meanwhile, when the value is bigger, the red

horizontal line in the motion indication window will be lower

accordingly.

 Time interval (sec) [0-7200]

The default interval is 10. The value is the interval between each

detected motion.

Triggered Action (Multi-option)

The Administrator can specify alarm actions that will take when motion is

detected. All options are listed as follows:

 Enable Alarm Output

Check the item and select the predefined type of alarm output to

enable alarm relay output when motion is detected.

 Record stream to SD Card

Select this item and the Motion Detection recording will be stored in

Micro SD/ SDHC card when motion is detected.

Pre-trigger buffer recording function allows users to check what

happened to cause the trigger. The pre-trigger buffer time range is from

1 to 3 seconds. Select <Upload for __ sec> to set the recording

duration after motion is triggered. The setting range is from 1 to 99999

seconds. Select <Upload during the trigger active> to record the

triggered video until the trigger is off.

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 164 165

Sin comentarios

Black BLK-PTZ12X Guía de instalación Pagina 96