Black BLK-PTZ12X Guía de instalación descargar pdf (Pagina 37)

Installation Guide

4.5.2 Corner Thin/Wide Box Mounting

Package Contents:

 M8x16 Screw x4

 Washer-8 x4

 Spring Washer-8 x4

Items Needed:

 Dome Camera

 Outdoor Mount Kit (supplied)

 Data Cable (supplied)

 Ethernet Cable (network Dome Camera)

 Standard/Compact Pendent Mount and equipped items (optional accessory)

 Corner Thin/Wide Box (optional accessory)

 Waterproof Rubber (supplied)

 M5 Standard/Security Screw (supplied)

 Screws and Screw Anchors for fixing the Corner Thin/Wide Box (not

supplied)

Tools Needed:

 Tool for drilling

 Tool for screwing

Follow the steps below to mount the Dome Camera with the Corner Thin/Wide

Box and Standard/Compact Pendent Mount.

1) Make a cable entry hole on the wall to recess the cable(s).

2) Fix the Corner Thin/Wide Box on the corner of the wall with proper screws

and screw anchors. Then run the cable(s) through the hole on the Corner

Mounting Plate with the Data Cable’s 22-pin cable coming out.

3) Fasten the Standard/Compact Pendent Mount onto the Corner Thin/Wide

Box with the supplied screws and washers. Then thread the cable(s) through

the Standard/Compact Pendent Mount with the cable(s) coming out of the

Pendent Mount’s outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations in

section 4.4.1 Compact Pendent Mount > Step 4.

4) Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 164 165

Sin comentarios

Black BLK-PTZ12X Guía de instalación Pagina 37