Black BLK-PTZ12X Guía de instalación descargar pdf (Pagina 31)

Installation Guide

4.4.2 Standard Pendent Mount

Package Contents:

 M8x12 Screw x1

 Spring Washer-8 x1

 Pendent Tube Washer x1

 Rubber Washer-8 x1

 Sponge x2

Items Needed:

 Dome Camera

 Outdoor Mount Kit (supplied)

 Data Cable (supplied)

 Ethernet Cable (network Dome Camera)

 Standard Pendent Mount and equipped items (optional accessory)

 Waterproof Rubber (supplied)

 M5 Standard/Security Screw (supplied)

 Screws and Screw Anchors for fixing the Standard Pendent Mount onto the

ceiling (not supplied)

Tools Needed:

 Tool for drilling

 Tool for screwing

Follow the steps below to mount the Dome Camera with the Standard Pendent

Mount.

1) Make a cable entry hole on the wall to recess the cables. Otherwise, users

could push up the cable entry board on the Standard Pendent Mount’s

mounting plate to place the cables (see the illustration in section 4.4.1

Compact Pendent Mount > Step 1).

2) Fix the Standard Pendent Mount on the wall with proper screws and screw

anchors.

3) Attach the Waterproof Rubber to the Standard Pendent Mount.

4) Run the cable(s) through the Standard Pendent Mount with the Data Cable’s

22-pin cable coming out of the outlet.

NOTE: Please block the cable entry hole with the supplied sponge

to avoid insects entering the Pendent Mount. See the illustrations in

section 4.4.1 Compact Pendent Mount > Step 4.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 164 165

Sin comentarios

Black BLK-PTZ12X Guía de instalación Pagina 31