Black BLK-HD4E Manual de usuario descargar pdf (Pagina 21)

15H.264 High Denition DVR User Manual

SECTION 2: HARDWARE OVERVIEW AND SETUP

SATA1 connector

SATA power connectors

PC board

Ensure that the data and power cable connectors are fully seated onto the connectors on the PC board.

9. Reinstall the DVR cover using the 7 screws removed earlier.

10. Reattach the power adapter to the back of the DVR.

2.4.2 BLK-HD10D, BLK-HD16D DVD-R/W installation

If your DVR does not include an internal DVD-R/W drive, use the following procedure to install one. The DVD-R/W can be used to

archive stored data including video clips and snapshots. Your DVR will accommodate one standard-size desktop system DVD-R/W

drive with a serial-ATA (SATA) interface. If your DVR was purchased without a DVD-R/W drive or HDD drive, a hardware kit,

including screws and cables, and a mounting bracket is included with the DVR. To install a DVD-RW drive, carefully follow the

procedure below.

CAUTION



Follow recommended electrostatic discharge (ESD) guidelines while performing this procedure. Install the DVD-R/W drive in

a static-free environment, wearing a certied ESD wrist strap. If a static free environment and ESD wrist strap is not available,

touch the bare metal of the DVR chassis frequently when installing the drive to dissipate the static charge naturally generated

on your skin and clothing.

1. If your DVR is powered on, use the menu system to perform a System Shutdown.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 123 124

Sin comentarios

Black BLK-HD4E Manual de usuario Pagina 21