Black BLK-HD4E Manual de usuario descargar pdf (Pagina 29)

23H.264 High Denition DVR User Manual

SECTION 2: HARDWARE OVERVIEW AND SETUP

Ensure that the data and power cable connectors are fully seated onto the connectors on the PC board.

8. Reinstall the DVR cover using the 7 screws removed earlier.

9. Reattach the power adapter to the back of the DVR.

2.5.3 BLK-HD4D, BLK-HD8D Installing a 2nd internal HDD

The DVR can include two internal HDDs, with the second HDD installed in the DVD-R/W (optical) drive bay. To install a 2nd HDD, do

the following.

CAUTION



If installing 2 HDDs into your DVR, always install HDDs of the same brand and model. If you install dierent HDDs, the DVR may

not recognize an HDD and can malfunction.

CAUTION



Follow recommended electrostatic discharge (ESD) guidelines while performing this procedure. Install the HDD in a static-free

environment, wearing a certied ESD wrist strap. If a static free environment and ESD wrist strap is not available, touch the bare

metal of the DVR chassis frequently when installing the drive to dissipate the static charge naturally generated on your skin and

clothing.

1. If a DVD-RW drive is installed in the optical drive bay, remove it by reversing the procedure included above in “2.4 DVD-R/W

Optical drive installation” on page 11.

2. Attach the mounting brackets and data/power cable to the 2nd HDD. See “2.5 HDD installation” on page 15 above.

3. Position the HDD in the optical bay as shown below, and attach it to the chassis using 4 screws, 2 on each side.

SATA1 connector

SATA0 connector

Primary HDD

Secondary HDD

PC board

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 123 124

Sin comentarios

Black BLK-HD4E Manual de usuario Pagina 29