Black BLK-HD4E Manual de usuario descargar pdf (Pagina 33)

27H.264 High Denition DVR User Manual

SECTION 2: HARDWARE OVERVIEW AND SETUP

SATA data cableSATA power cable

SATA connector HDD2PC boardFront panel ribbon cable

9. Plug a SATA power cable from the cable bundle into the mating connector(s) of the HDD drive(s).

10. Plug a SATA data cable provided in the hardware kit into the mating connector of the HDD. Plug the other end of the cable

into a SATA connector on the PC board.

NOTE

SATA data interfaces on the PC board are labeled HDD1, HDD2, HDD3, etc. Not all are connectorized. Always use the lowest

numbered connectorized SATA data interfaces for the HDD drives in the DVR, and a higher numbered connector for the DVD-R/W

drive. For example, if HDD1 is not connectorized, but HDD2, HDD3 and HDD4 are, and two HDD drives are (or will be) installed in

the DVR, use HDD2 for the primary HDD drive, HDD3 for the secondary HDD drive, and HDD4 for the DVD-R/W drive.

11. Reinstall the DVR cover.

12. Continue with “SECTION 3 System Setup” on page 28. During system startup and initialization, reformat the new HDD drive(s).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 123 124

Sin comentarios

Black BLK-HD4E Manual de usuario Pagina 33