Black BLK-HD4E Manual de usuario descargar pdf (Pagina 68)

SECTION 7: WEB CLIENT

SECTION 7

Web Client

Web Client, the network-based administrative interface to the DVR, is used with Microsoft Internet Explorer® (IE) tool used to

monitor and control the DVR remotely. To use this feature, the DVR must rst be congured and connected to a network. The URL

(internet address) of the DVR depending the path used to connect to it.

If your computer is networked on the same local network as the DVR you are accessing, the URL is the IP address shown in the DVR

System Information window. In the example shown below, the URL is the IP ADDRESS: 192.168.5.60.

If you are accessing your DVR across the internet, your DVR may be addressed through a port forwarded by a router or a device

that connects the network with the DVR to the Internet, or through a connection to a DDNS web service such as ddnscenter.com

(preferred). To use this service for accessing your DVR across the internet, refer to ddnscenter.com for more information.

7.1 Connecting to the DVR with IE

After your DVR is setup on a local LAN, use IE to connect to it to verify the DVR connectability. This connection increases exibility for

monitoring and conguring your security system.

Before you can connect to the DVR with IE, the (default) security settings in IE are modied slightly to allow it to install an software

from the DVR.

1. At your PC, load IE.

NOTE

If your computer operating system is Windows Vista or Windows 7, User Account Control can interfere with the normal

operation of the DVR user interface. To disable UAC, open the Control Panel > User Account > User Account window, clear the

Use User Account Control (UAC) to help protect your computer check box, then click OK. A computer restart may

be required.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 123 124

Sin comentarios

Black BLK-HD4E Manual de usuario Pagina 68